Guideline

How to Install a Whole House Water Filter on a Well

Pinterest LinkedIn Tumblr

Nothing can give you the satisfaction about the purity of your drinking water better than a well. You know this water is not contaminated with waste and it is the pure earthly water. But unfortunately, this is not always the case. Many times water from the wells brings a lot of earth with it, and some bacteria that are able to grow even underground.

Another major issue with well water is that it might have a problem of low pH which is again not very good for consumption and plumbing of your house as well. But no need to worry at all, here in this article I will explain how to install a whole house water filter on a well and what type of filter would be needed.

Inspect the Water of your Well

Each type of water supply has different sorts of contaminants in it and before you can start looking for a whole house water filter you have to completely understand the exact issues with your well water supply. According to our research, the biggest problem of well water is the soil that comes with it. This can be easily removed by using a sedimentation filter. In fact most of the times this is the only issue that you might face having your water supply coming from a well.

The second most popular issue with well water is low pH. This shifts the water towards an acidic side and makes it harmful for long term consumption and damage the water supply pipes as well. A simple sedimentation filter cannot change the pH of water that is why you have to install another filter to deal with this issue.

After getting your water checked, you might notice other problems like some bacteria, heavy metals, etc. For each of these problems you will need a different type of water filter and at times a combination to give yourself cleanest drinking water.

Here we would recommend reading the best home water purification systems.

Where to Install a Whole House Water Filter on a Well

Why do you have to install a whole house water filter on a well and why you should not use the regular water filters separately? Well, the answer is simple, well water contains a lot of soil that can decrease the life of your regular water filters. A sedimentation filter installed at the main supply line where it filters water before it reaches the water softener or other smaller filters can save you a lot of trouble and money too. Connect this filter to your main supply line but there are a few things to keep in mind while doing that.

Precautions to Take when Installing a Whole House Water Filter on a Well

If you are planning to install the filter by yourself, you should be aware of certain things that you are going to need. Mostly the water supply lines are made with copper or some other metal. If your system does not have a joint, you would have to cut the pipe and it is a hefty task. We would recommend taking services of a professional plumber for this.

When installing a filter, make sure to leave a bypass line from where the water can pass without passing through the whole house water filter. Also, install valves on both the mainline and the bypass line. In this way, you can turn off the water supply in either one of these and clean your water filter without disrupting the water supply to your house.

Some Recommended Filter Types

Basically, you will have to get 3 types of filter to achieve the ultimate purity of your water coming from a well.

  • To remove dirt and debris from the water, use a sedimentation filter at the starting of the main supply line.
  • To remove bacteria and other pathogens you can either use a membrane filter of a UV filter. The choice depends upon the type of pathogens found in water. This once again highlights the importance of getting your water tested before looking for a filter.
  • If your water has a low pH, using calcite or any other such pH maintaining filter could be very beneficial.

Tips to Save Money

The best way to save up some money while getting a whole house water filter on a well is to talk to your contractor and understand all the expenses. In this way, you can cut out the things you do not need. Also, ask your contractor to explain the cleaning process of your filter in detail so that you can save up some service charges in the future.

Write A Comment

Pin It