How To Clean PUR Water Filter Faucet Mount

Pinterest LinkedIn Tumblr

To be sure of purified and clean water running from your PUR faucet mount filter, it is crucial to clean it timely.

Safe drinking water is essential to keep your health away from all the risk-factors of catching different diseases.

For that, PUR filters have taken up the responsibility to provide you with fresh, soft, and healthy drinking water. Their faucet mount filters are undoubtedly second to none in their performance.

However, if you don’t clean them the way they are meant to be cleaned, the quality of water filtered through them will be affected.

It is needless to say that your family’s health should be your priority. No matter how busy you are, you can take 15 to 20 minutes out of your schedule to clean your PUR water filter.

This article will show you the easiest and most efficient way to clean your PUR faucet mount water filters.

Reasons To Clean Your Faucet Mounted PUR Filter

Your kitchen faucet is one of the vital parts in your home that is used all day long for different purposes.

Whether it is about quenching your thirst, making baby food, cooking, washing fruits, and vegetables, or making tea or coffee, your faucet is commonly used. This is one of the many reasons why people prefer using faucet mount filters.

Do You Know! Not only are PUR Faucet filters cost-effective but also low-maintenance and space-savers.

Saying the PUR faucet mount filters are low-maintenance doesn’t mean that you can just install and forget them. The filters are installed on the aerators of your faucet for better filtration, which is why it becomes more important to keep the filters clean.

Your faucets can rust, get grimy, or grow algae on it if not cleaned. It will also affect the performance of your filter. Cleaning your filter will also keep your faucet damage-free.

Also Check this: Pur Faucet Water Filter Reviews

Step By Step Guide To Clean PUR Water Filter Faucet Mount

PUR faucet mount filters seem to be a bit complex for cleaning. However, it is not more complicated than your health can get by drinking filthy water. More parts are involved in the cleaning process, but it won’t take a lot of your time.

Let’s have a look at the comprehensive step by step guide to clean PUR water filter faucet mount

1. Remove The Filter

The PUR faucet filter is installed on the top of the faucet, which is why you will first need to remove it. This will take only a minute. Just twist off the cover and remove the filter.

Note! If the filter is too tight, you can use a wrench to loosen the fittings.

2. Clean Or Replace?

The next and most important thing to consider is whether the filter needs cleaning or replacing. If you clean a PUR faucet filter once in a month, it can easily last for more than 3 months.

If you haven’t cleaned it in forever, then the whole system will get rusted and need replacement. Check the condition of your filter and throw away the old filter if it is out of order. 

Comparison: PUR Vs Brita Faucet Filter Comparison | Ultimate Guide

3. Canister Cleaning

After removing or cleaning the filter, clean the canister as well. Use a solution that is food and water safe because it will go inside the filter as well.

You can use mild dish soap or just 1 cup vinegar mixed in 3 cups of water. Soak the canister in the water and vinegar bowl; clean it with a damp cloth and then leave to dry.

Important! Make sure that there are no harmful chemicals involved in the cleaning process.

4. Debris Removal

Now, run it under cold water and check if there is any debris of dirt left inside. Sometimes sediments, dirt, grime, and hard particles get stuck on the surface of the canister when the filter cleans the water.

Leave the water running through it for 5 to 10 minutes, and dry again. 

5. Reassemble

Install the canister and filter back on the faucet and let the water run from the faucet for 5 minutes.

Make sure that your faucet aerator is also free from any dirt or algae. Run water with pressure so that any dirt on the faucet will automatically wash away. 

Some Tips To Make Your Filter Last For Long

By following these useful tips, you can make your filters last for longer than their expected lifespan. 

  • Make sure you flush your filter every once in a while. Don’t worry when the filter flushes out cloudy water because it is part of it’s self-cleaning.
  • For best performance, change your filter after every 3 months.
  • Always clean the exterior of your filters with damp cloth or sponge.
  • Never run hot water in your filter when you activate it.
Rate this post

Please note: is reader supported. This page may contain affiliate links. If you buy a product or service through such a link we earn a commission at no additional cost to you.

Write A Comment